Implementing Cisco IP Telephony & Video, Part 1 (CIPTV1)

This course is already delivered, please contact us for the next available session tel:+357 22 44 14 92
Course Outline in PDF

Overview:

CIPTV1 v1.0 gives the learner all the tools they need to implement a Cisco Collaboration solution at a single site environment. This course focuses on Cisco Unified Communications Manager V10.x as the call routing and signaling component for the Cisco Collaboration solution. CIPTV1 labs help the learners to successfully perform post-installation tasks, configure Cisco Unified Communications manager, implement MGCP ahd H.323 and SIP trunks. Learners will also implement audio/video conferencing, media resources, and describe QoS.

Prerequisites

Working knowledge of fundamental terms and concepts of computer networking, LANs, WANs, switching and routing Ability to configure and operation Cisco routers and switches, enablement of VLANs and DHCP Knowledge of basics of digital interfaces, PSTN, VoIP Basics of converged voice and data networks.

At Course Completion:
 
•Describe the role of Cisco Unified Communications Manager in a Cisco Collaboration Solution, including its functions, architecture, deployment, and redundancy options, and how to deploy endpoints, users, and Cisco IP Phone Services
•Describe the functions and the purpose of a dial plan and explains how to implement oncluster calling
•Describe how to configure MGCP, H.323, and SIP gateways. The module also describes how to create a dial plan that supports inbound and outbound off-cluster calling for numbers and URLs.
•Describe the types of media resources that Cisco Unified Communications Manager supports, how to configure Cisco Unified Communications Manager server software based media resources, and how to implement Cisco hardware-based media resources
•Describe how to implement audio and video conferencing devices that can be used with Cisco Unified Communications Manager, built-in Cisco Unified Communications Manager software audio bridge, Cisco IOSbased audio and video conference bridges, and Cisco TelePresence conferencing products including Cisco TelePresence MSE 8000, Cisco TelePresence Server, Cisco TelePresence MCU, and Cisco TelePresence Conductor
•Provide an introduction to QoS with emphasis on the QoS components, often referred to as the QoS toolkit, that are used to provide services for various business applications.

Course Outline:

Module 1: Cisco Unified Communications Manager Introduction

•Overview of the Cisco Collaboration Solution
•Cisco Unified Communications Manager Functions
•Cisco Unified Communications Manager Architecture
•Cisco Unified Communications Manager Models
•Cisco Unified Communications Manager Redundancy
•Cisco Unified Communications Manager Servers
•Cisco Unified Communications Manager Services
•Cisco Unified Communications Manager Groups
•Cisco Unified Communications Manager
Configuration Elements: Enterprise Parameters
•Cisco Unified Communications Manager Configuration Elements: Service Parameters
•Cisco Unified Communications Manager
•Configuration Elements: Device Settings
•Comparison of Endpoints Supported by Cisco Unified Communications Manager
•Endpoint Configuration Elements
•Cisco Unified Communications Manager User Accounts
•Types of LDAP Integration: Synchronization
•Types of LDAP Integration: Authentication
•LDAP Integration Features: Attribute Mapping
•LDAP Integration Feature: Filters
•Overview of Cisco IP Phone Services
•Cisco IP Phone Services: Deployment
•Options

Module 2: Dial Plan Introduction and Implementation of Single-Site On-Cluster Calling

•Dial Plan Overview
•Dial Plan Components and Their Functions
•Comparison of Dial Plan Configuration
•Elements
•Endpoint Addressing
•Cisco Unified Communications Manager
•Call Routing Overview
•Cisco Unified Communications Call-Routing
•Logic
•Addressing Methods and Digit Analysis
•Variable-Length Patterns, Overlapping
•Patterns, and Urgent Priority
•Calling Privileges Overview
•Calling-Privileges Configuration Elements
•Partitions and CSSs
•Partition and CSS Considerations
•Partition and CSS Configuration
•Call Coverage Overview
•Call Hunting
•Call Hunting Scenarios
•Call Queuing
•Call Hunting and Call Queuing Configuration

Module 3: Implementation of Single-Site Off-Cluster Calling

•PSTN Access Methods
•TDM Gateway vs. Cisco UBE
•TDM Gateway Comparison
•Audio and Video Codec Selection
•PSTN Numbering Plans
•MGCP Gateway Implementation Overview
•MGCP Gateway Support in Cisco Unified Communications Manager
•MGCP Gateway Implementation Considerations
•Implement an MGCP Gateway in Cisco
•Unified Communications Manager
•Integrate Cisco IOS MGCP Gateways with
•Cisco Unified Communications Manager
•Configure Cisco IOS MGCP Gateway Fractional PRIs
•Path Selection in Cisco Unified Communications Manager
•Route Groups in Cisco Unified Communications Manager
•Route Lists in Cisco Unified Communications Manager
•Digit Manipulation Requirements with Multiple Paths
•Digit Manipulation Configuration Elements in Cisco Unified Communications Manager
•PSTN Access Digit Manipulation Example
•H.323 and SIP Gateway Overview
•Dial Peer Overview
•Inbound Dial Peer Selection
•Discovery 1: Exploring Cisco IOS Gateway
•Functions
•Outbound Dial Peer Selection
•Discovery 2: Exploring Cisco IOS Gateway
•Functions
•Digit Manipulation Features
•Codec Configuration
•COR Configuration
•H.323 PSTN Gateway Configuration in
•Cisco Unified Communications Manager
•Deployments
•Dial Plan Design and Documentation
•Cisco Unified Border Element Overview
•Protocol Interworking on the Cisco Unified Border Element
•Media Flows on the Cisco Unified Border Element
•Codec Negotiation on the Cisco Unified Border Element
•PSTN SIP Access Overview
•Configuration Requirements in Cisco Unified
•Communications Manager
•Configuration Requirements for the Cisco
•Unified Border Element
•Cisco Unified Border Element URI Dialing
•Overview
•Cisco Unified Communications Manager
•URI Dialing Configuration Requirements
•Cisco Unified Border Element URI Dialing
•Configuration Requirements
•Dial Plan Interworking Characteristics
•Dial Plan Interworking Support

Module 4: Media Resources

•Media Resources Overview
•Audio Conferences
•Video Conferences
•Transcoders
•Media Termination Points
•Annunciators
•Music on Hold
•Video on Hold
•Trusted Relay Points
•MOH Support in Cisco Unified
Communications Manager
•Unicast and Multicast MOH Characteristics
•MOH Audio Source Selection
•MOH Configuration
•Annunciator Support in Cisco Unified Communications Manager
•Annunciator Configuration Procedure
•Media Resource Access Control Overview
•Conference Bridge Selection
•Media Resource Access Control
Configuration
•MTP Types and Functions
•MTP Requirements for SIP Trunks
•MTP Requirements for H.323
•MTP Configuration Procedure

Module 5: Audio and Video Conferencing

•Devices That Support Audio or Video Conferencing
•Comparison of Audio Conference Bridges
•Comparison of Video Conference Bridges
•Conference Bridge Integration Options in
•Cisco Unified Communications Manager
•Cisco Unified Communications Manager Software Audio Conference Bridge Cisco IOS-based Conference Bridges
•Cisco Unified Communications Manager and Cisco IOS-based Conference Bridge Configuration
•Cisco Telepresence MSE 8000 Overview
•Cisco Telepresence MSE 8000 Feature Blades
•Cisco Telepresence MSE 8000 Capabilities
•Cisco Telepresence MSE 8000 Feature Blade Configuration
•Cisco Telepresence Server Overview
•Integration of Cisco Telepresence Server and Cisco Unified Communications Manager
•Configuration Example of Cisco
Telepresence Server Integration
•Cisco Telepresence Conductor
Characteristics
•Options for Integrating Cisco Telepresence Conferencing Resources
•Integration of Cisco Telepresence Conductor and Cisco Unified Communications Manager

Module 6: Quality of Service

•Issues in Packet-Switching Networks
•Solutions to Packet-Switching Network Issues
•Bandwidth Calculations\
•Bandwidth Calculations for Layer 2 Overhead
•Bandwidth Calculations for Video Calls
•Three Models of QoS: Best-Effort
•Three Models of QoS: IntServ
•Resource Reservation Protocol
•Three Models of QoS: DiffServ
•Differentiated Services Code Point
•Overview of QoS Components
•Classification
•Marking
•Mapping Classes and Markings
•Congestion Management
•Congestion Avoidance
•Policing
•Shaping
•Link Efficiency Methods: Compression
•Link Efficiency Methods: LFI
•Marking Methods
•Class-Based Markings
•Trust Boundaries
•Mapping Layer 2 CoS to Layer 3 QoS
•Marking Configuration Example
•Comparison of Policing and Shaping
•Class-Based Policing: Single Bucket
•Class-Based Policing: Dual Buckets
•Class-Based Policing: Dual Rate
•Class-Based Shaping
•Low Latency Queuing
•Monitoring LLQ
•Calculating Bandwidth for LLQ
•Example 1: Single-Rate Single Token
Bucket Class-Based Policing
•Example 2: Single-Rate Dual Token Buckets
Class-Based Policing
•Example 3: Class-Based Shaping
Labs
•Configuring Cisco Unified Communications Manager Initial Settings
•Deploying Endpoints and Users
•Implementing Endpoint Addressing and Call Routing
•Implementing Calling Privileges
•Implementing Call Coverage
•Implementing PSTN Calling Using MGCP Gateways
•Implementing PSTN Calling Using H.323 Gateways
•Implementing PSTN Calling Using SIP Trunks Through Cisco Unified Border Element
•Using Cisco Unified Border Element for URI Dialing
•Implementing Annunciators and MOH
•Implementing Conference Bridges
•Implementing Cisco TelePresence Conductor

sd sd sd sd sd sd sd sd sd sd sd sd